Fluke MET/CAL Procedure ============================================================================= INSTRUMENT: Philips PM 2518: (1 year) CAL VER /5500 DATE: 24-Sep-98 AUTHOR: Fluke Corporation REVISION: $Revision: 1.5 $ ADJUSTMENT THRESHOLD: 70% NUMBER OF TESTS: 29 NUMBER OF LINES: 133 CONFIGURATION: Fluke 5500A ============================================================================= # # Compatibility: # 5500/CAL or MET/CAL 4.0 or later. # # Subprocedures: # None # # Required Files: # 2618v.bmp # 2618lc.bmp # 2618hc.bmp # # System Specifications: # TUR calculation is based on specification interval of the accuracy file. # The default 5500A accuracy file contains 90 day specs. # # Fluke makes no warranty, expressed or implied, as to the fitness # or suitability of this procedure in the customer's application. # # This Procedure verified using a "generic" UUT. # STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON 1.001 ASK- R P F V 1.002 ASK+ K X 1.003 HEAD PRELIMINARY INSTRUCTIONS 1.004 DISP Warm-up time: NONE 1.004 DISP Temperature: 23 degC +/-2 degC 1.004 DISP Humidity: 20% - 80% 1.005 DISP [32] WARNING 1.005 DISP HIGH VOLTAGE is used or exposed during the performance 1.005 DISP of this calibration. DEATH ON CONTACT may result if 1.005 DISP personnel fail to observe safety precautions. 1.006 HEAD {AC VOLTAGE} 1.007 PIC pm2618v 1.008 DISP Press the button to turn the unit ON. 1.008 DISP 1.008 DISP Set the FUNCTION switch to AC VOLTS. 1.009 HEAD AC VOLTAGE: {1000mV Range} 1.010 5500 1000 1000.0mV 0.5% 0.1/ 1kH SI 2W 2.001 5500 1000 1000.0mV 4% 1/ 20kH SI 2W 3.001 HEAD AC VOLTAGE: {10V Range} 3.002 5500 10 10.000V 0.5% 0.1/ 1kH SI 2W 4.001 5500 10 10.000V 4% 1/ 20kH SI 2W 5.001 HEAD AC VOLTAGE: {100V Range} 5.002 5500 100 100.00V 0.5% 0.1/ 1kH SI 2W 6.001 5500 100 100.00V 4% 1/ 20kH SI 2W 7.001 HEAD AC VOLTAGE: {1000V Range} 7.002 5500 1000 900.0V 0.5% 0.1/ 100H SI 2W 8.001 HEAD {DC VOLTAGE} 8.002 DISP Set the FUNCTION switch to DC VOLTS. 8.003 HEAD DC VOLTAGE: {1000mV Range} 8.004 5500 1000 1000.0mV 0.1% 0.02/ 2W 9.001 HEAD DC VOLTAGE: {10V Range} 9.002 5500 10 10.000V 0.1% 0.02/ 2W 10.001 5500 10 -10.000V 0.1% 0.02/ 2W 11.001 HEAD DC VOLTAGE: {100V Range} 11.002 5500 100 100.00V 0.1% 0.02/ 2W 12.001 HEAD DC VOLTAGE: {1000V Range} 12.002 5500 1000 900.0V 0.1% 0.02/ 2W 13.001 HEAD {DIODE} 13.002 DISP Press the button to select DIODE. 13.003 5500 1000 500mV 0.3% 0.1/ 2W 14.001 HEAD {RESISTANCE} 14.002 DISP Set the FUNCTION switch to OHMS. 14.003 HEAD RESISTANCE: {100 MOhm Range} 14.004 5500 100 100.0MZ 5% 3/ 2W 15.001 HEAD RESISTANCE: {10 MOhm Range} 15.002 5500 10 10.000MZ 0.5% 0.1/ 2W 16.001 HEAD RESISTANCE: {1000 kOhm Range} 16.002 5500 1000 1000.0kZ 0.3% 0.1/ 2W 17.001 HEAD RESISTANCE: {100 kOhm Range} 17.002 DISP Connect the 5500A to the UUT as follows: 17.002 DISP [32] 5500A AUX HI to UUT V/OHM 17.002 DISP [32] 5500A AUX LO to UUT COM 17.002 DISP [32] 5500A NORMAL HI to UUT V/OHM 17.002 DISP [32] 5500A NORMAL LO to UUT COM 17.002 DISP Connect the SENSE leads DIRECTLY to the UUT. Connect 17.002 DISP the NORMAL leads to the SENSE leads AT the UUT. 17.003 5500 0.0Z S CW 17.004 DISP Press the button to remove the lead resistance. 17.005 5500 100 100.00kZ 0.3% 0.1/ CW 18.001 HEAD RESISTANCE: {10 kOhm Range} 18.002 5500 10 10.000kZ 0.3% 0.1/ CW 19.001 HEAD RESISTANCE: {1000 Ohm Range} 19.002 5500 1000 1000.0Z 0.3% 0.1/ CW 20.001 HEAD {CONTINUITY} 20.002 DISP Set the FUNCTION switch to CONTINUITY. 20.003 5500 1.0Z S CW 20.004 EVAL Does the UUT {display "00X.X" and an audible tone present}? 21.001 HEAD {DC CURRENT} 21.002 DISP Set the FUNCTION switch DC CURRENT. 21.003 PIC pm2618lc 21.004 HEAD DC CURRENT: {20mA Range} 21.005 5500 20 20.00mA 0.5% 0.1/ 2W 22.001 HEAD DC CURRENT: {200mA Range} 22.002 5500 200 200.0mA 0.5% 0.1/ 2W 23.001 PIC pm2618hc 23.002 HEAD DC CURRENT: {2A Range} 23.003 5500 2 1.000A 0.5% 0.1/ 2W 24.001 HEAD DC CURRENT: {10A Range} 24.002 5500 10 10.00A 0.5% 0.1/ 2W 25.001 HEAD {AC CURRENT} 25.002 DISP Set the FUNCTION switch to AC CURRENT. 25.003 HEAD AC CURRENT: {10A Range} 25.004 5500 10 10.00A 0.6% 0.3/ 100H SI 2W 26.001 HEAD AC CURRENT: {2A Range} 26.002 5500 2 1.000A 0.6% 0.3/ 100H SI 2W 27.001 PIC pm2618lc 27.002 HEAD AC CURRENT: {20mA Range} 27.003 5500 20 20.00mA 0.6% 0.3/ 100H SI 2W 28.001 HEAD AC CURRENT: {200mA Range} 28.002 5500 200 200.0mA 0.6% 0.3/ 100H SI 2W 29.001 END